News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

65 Coronet 6cyl. to 8 cyl?

Started by 65post, April 24, 2011, 02:34:08 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

65post

April 24, 2011, 02:34:08 PM
Hey guys, I am getting ready to drop in my 440 into my 65 coronet.My problem is I have a nice rust free K member in the car now but it is for a 6 cyl.Is there mounts I can get to weld into my K member? Or should I swap it out for a 8 cyl. one.
Previously owned Daytona XX29L9B423239 - f8 - white int. - power windows.

Chatt69chgr

#1
April 25, 2011, 10:03:59 AM
Schumacher recommends that you change the /6 K member out for the V8 one.  Small block and big block the same.  Must stay with the 62-65 since the later postion the engine too far back.
Print
Go Up Pages1
User actions