News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

pic of rear license plate light 72 Charger

Started by 67tbird, April 22, 2011, 10:34:34 PM

Previous topic - Next topic

67tbird

I know, I know "what idiot doesn't know where license plate light goes" I'm that idiot. where is our "short bus" smiley?

71superbee

Here is a pic from the 72 Parts Catalog

Nacho-RT74

well, on Chargers is on top, not on bottom, just right above the license plate hinge.

71/72s have a rubber cover attached to body to seal the light coming out from that area and keep the light out of the body gap with trunk lid.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

67tbird

Looks like junk yard time,does anybody know if they repop the rubber cover? all I have is a steel cover between deck lid and license plate area. I also bought repop radiator overflow bottle, cant figure out where it attaches(probably covered by aluminum radiator knowing my luck). Dave





NHCharger

Here's your sign  :shortbus:   :lol: :lol:

You could probably use a piece of a tire inner tube for the rubber flap.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

Nacho-RT74

Quote from: 67tbird on April 23, 2011, 02:06:14 PM
I also bought repop radiator overflow bottle, cant figure out where it attaches(probably covered by aluminum radiator knowing my luck). Dave

will be very interesting to see what you got :scratchchin: because AS FAR I KNOW those are not being repopped... at least THE right one

steel cover will be fine, but as far I know they are rubber and attached with flanged phillips screws. Not hard to make them, just a rubber sheet and some knife cuts... voila! not big deal

73/74s doesn't have them since the bumper filler makes that job too
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

CDN72SE

1972 Charger SE

67tbird

checked the label on repop bottle, they covered the 73-74 sticker with a 70-74 sticker so it's probably wrong, been sitting couple months, don't remember who I bought it through will have to research that, where do they go on 73-74, can I retrofit bottle, originality doesn't matter, just function. Thanks for all your help! Dave

Nacho-RT74

73/74s goes on passenger side againts radiator core, EXACTLY AT SAME PLACE where you have the windshield washer. Overflow bottles on 71/72s is a very rare option and hangs out from radiator core support with speciall brackets, just over the radiator, filling a room between fan shroud and battery
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

CDN72SE

1972 Charger SE