News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1st gen. Durango wheel trim / flares - aftermarket

Started by Dave Kanofsky, April 21, 2011, 06:44:44 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dave Kanofsky

April 21, 2011, 06:44:44 AM
I have a '99 Durango that is showing some rust in the 1/4's right above the wheelwells.

Mine does not have the factory flares on it, so I am looking for a cheap used set.

I was also looking at some of the aftermarket stainless ones. I don't want them to stick out much, just cover up the rust.

Anybody have ones they like and can maybe share a pic on a 1st gen. Dingo?

It looks like there's Putco, and TFP, and QMI but I haven't found a decent pic of any of them!   :brickwall:

Thanks for your help!

:cheers:
"God sent his Son into the world not to judge the world, but to save the world through him." John 3:17, NLT

Racers For Christ Chaplain (www.teamrfc.org)

bull

#1
April 21, 2011, 10:52:33 AM
If you don't get much here try www.dakota-durango.com.

Dave Kanofsky

#2
April 21, 2011, 11:01:13 AM
Thanks !
"God sent his Son into the world not to judge the world, but to save the world through him." John 3:17, NLT

Racers For Christ Chaplain (www.teamrfc.org)

TruckDriver

#3
April 21, 2011, 01:53:54 PM
Try www.lmctruck.com too. They carry all that stuff and more.  :yesnod:
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P
Print
Go Up Pages1
User actions