News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Challenger Burns on Assembly Line

Started by Cooperman, April 14, 2011, 03:45:59 PM

Previous topic - Next topic

Cooperman

I am not a vegetarian because I love animals; I am a vegetarian because I hate plants!

Ghoste


bull


tan top

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=6578923

sounds  like it was having some paint work done  off the assembly line , going by the moparts thread   :scratchchin:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Chevysrule

cool photo , not really a big deal as far a loss is concerned ,simply a write off.. kinda like an employee spilling a coffee at the local starbucks the only difference being the $ lost on the assembly line while they cleaned up this melted mess...... The Photo itself of this burnt new Challenger is probably going to be way cooler and more timeless than the car itself for future generations of car lovers to enjoy if these cars ever get the following of the originals.....

resq302

Wow!  nicely melted hood!  And what is with all that aluminum foil all over the back and interior of the car?
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

Brock Samson

At all par there's been a thread running about Mopes catching fire, last one was a tow car at a parade.. a durrango there were a couple other too..  :scratchchin:

hemi-hampton

I hate heat lamps. Just bake in a booth. Incompatancy in my opinion. I've seen similar Accidents just ready to happen. All because of Rushing. LEON.

resq302

Quote from: Brock Samson on April 14, 2011, 06:57:33 PM
At all par there's been a thread running about Mopes catching fire, last one was a tow car at a parade.. a durrango there were a couple other too..  :scratchchin:

Don't forget about that thread on here with the brand new charger patrol vehicle police car that caught fire!
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

bull

Quote from: Brock Samson on April 14, 2011, 06:57:33 PM
At all par there's been a thread running about Mopes catching fire, last one was a tow car at a parade.. a durrango there were a couple other too..  :scratchchin:

When someone mentions a topic or starts a new thread that's been discussed here already you usually jump down their throat. I won't do that to you but perhaps someone else here is seeking some revenge against "Brock the Thread Nazi." If so I will leave this here: http://www.dodgecharger.com/forum/index.php/topic,79879.0.html

Silver R/T

http://www.cardomain.com/id/mitmaks

1968 silver/black/red striped R/T
My Charger is hybrid, it runs on gas and on tears of ricers
2001 Ram 2500 CTD
1993 Mazda MX-3 GS SE
1995 Ford Cobra SVT#2722

Cooter

" I have spent thousands of dollars and countless hours researching what works and what doesn't and I'm willing to share"

Budnicks

Heck every make of car manufactured has the notorious, don't want to be there Monday cars & Friday cars, something is left loose because they want to rush home or something, Chit happens.     Budnicks
"fill your library before you fill your garage"   Budnicks

Richard Cranium

Quote from: resq302 on April 14, 2011, 06:52:12 PM
Wow!  nicely melted hood!  And what is with all that aluminum foil all over the back and interior of the car?

Automotive skin grafts
I am Dr. Remulac

Old Moparz

Now if Chrysler takes the VIN off the burnt up Challenger & puts it on another Challenger somewhere behind it on the assembly line, is that considered a re-body, or is it considered an assembly line parts reassignment procedure?
               Bob               



              Going Nowhere In A Hurry