News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

anyone interested in seeing this one ?

Started by gtx6970, March 17, 2011, 08:09:18 PM

Previous topic - Next topic

gtx6970

 I know a lot of the members here are Moparts members as well, but many are not and wondered if everyone is interested in following along :drool5:
Yea, I know it's not a Charger but it is a real V-code Road Runner .

Just 6T9 CHGR

Chris' '69 Charger R/T


Brock Samson


gtx6970

Quote from: Just 6T9 CHGR on March 17, 2011, 08:19:30 PM
Absolutely!  Its the right colors!  ;)

it's EK2 exterior and even better is has Burnt orange interior. Original 440 six pack , 4 speed 4.10 Dana car.
But it's now a 493 stroker, Indy Cylinder headed  700 hp monster . To give you an idea, the fuel system is a #8 steel braided line front to rear to feed this thing.

gtx6970


moparsons


gtx6970

Everywhere you look ,,,it's orange

tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

66FBCharger

Bill,
Can you post some pictures of the interior?
'69 Charger R/T 440 4 speed T5, '70 Road Runner 440+6 4 speed, '73 'Cuda 340 4 speed, '66 Charger 383 Auto
SOLD!:'69 Charger R/T S.E. 440 4 speed 3.54 Dana rolling body

gtx6970

Quote from: 66FBCharger on March 18, 2011, 06:24:03 AM
Bill,
Can you post some pictures of the interior?

Right now I don't have a single one of the interior. It's still on the lift and I prefer to not be climbing in and out of the car while it's between 2 steel posts. (it's this fear of denting or scratching thing I have )

I will have all the drivetrain finished up either today or tomorrow afternoon. and should be able to roll it forward to get some before pictures.
The interior is/was already done when I picked it up, I just need to assemble the dash cluster,connect the wiring, put the already done steering  column in  and thne it just a a matter of putting all the soft trim in. My only major job interior wise is rebuild the 1/4 window regulators and guides to hopefully get rid of an annoying rattle.


On a side note I am moving the shop  at now at the end of the month. so the last week of March everything gets packed up and moved an 1/8th mile. The shop I lease right now is very nice and I'm paying a lot of money for road frontage / exposure I prefer to not have.

moparstuart

 :drool5: :drool5: :drool5: :drool5:   love it 

  here is my vit- c  70 RR 4spd car I hope to restore someday
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

billssuperbird


Just 6T9 CHGR

Chris' '69 Charger R/T


69_500

Orange is very popular at our house. Hence the reason the garage and my son's bedroom are both painted HEMI Orange.

Roger 68 charger

68 charger RT 505"
70 cuda
99 Durango

moparstuart

Red and orange are popular at my house also 
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

pipeliner

Thats one sweet ride.I love the orange  but just a little too much orange for me IMO.

gtx6970

With the fuel pump out to be rebuilt. All the suspension is back in a semi -adjusted .
So , I moved to the interior today and started putting it back together.

Got the dash bezel  applique and lower dash surrounds in.Lower steering column shaft needs a hole drilled in it to attach what I think is a flaming river coupler. Then it will go in.
I'm not sure how or why but it appears the hole where the cross shaft is supposed to be has ben welded up and ground down

So firing this puppy up is soon,,,,,,very soon.

resq302

Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

resq302

Bill, where do you get one of those steering wheel covers?
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

gtx6970

Quote from: resq302 on March 23, 2011, 09:57:29 AM
Bill, where do you get one of those steering wheel covers?

Wheel was done by Garys Steering wheels and it's got his logo on it . I might add it's not very often you se a burn orange rimblow either. and it looks reeeeeal good :drool5:

I had thoughts about looking into having them made ,only with MY logo :scratchchin:

resq302

Quote from: gtx6970 on March 23, 2011, 06:42:18 PM
Quote from: resq302 on March 23, 2011, 09:57:29 AM
Bill, where do you get one of those steering wheel covers?

I had thoughts about looking into having them made ,only with MY logo :scratchchin:

I'd buy one.  Its a hell of an idea to keep the dirt and grime off of your hands after you just cleaned the wheel for a show!
Brian
1969 Dodge Charger (factory 4 speed, H code 383 engine,  AACA Senior winner, 2008 Concours d'Elegance participant, 2009 Concours d'Elegance award winner)
1970 Challenger Convert. factory #'s matching red inter. w/ white body.  318 car built 9/28/69 (AACA Senior winner)
1969 Plymough GTX convertible - original sheet metal, #'s matching drivetrain, T3 Honey Bronze, 1 of 701 produced, 1 of 362 with 440 4 bbl - auto

gtx6970

Installed ,,,,,,, then revealed

tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Brock Samson

i don't like that wheel, but rare indeed! looking good...  :yesnod: