News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Repro Shifters

Started by BananaDan, March 15, 2011, 11:34:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BananaDan

March 15, 2011, 11:34:14 PM
How are the reproduction shifters from BEA/PGC?  I am looking to get a new shifter and linkage setup for my car (auto).

Dan
*This post brought to you by Carl's Jr.®*



Great spirits have always encountered violent opposition from mediocre minds. The mediocre mind is incapable of understanding the man who refuses to bow blindly to conventional prejudices and chooses instead to express his opinions courageously and honestly.  ~A. Einstein

68blue

#1
March 17, 2011, 09:32:34 AM
No issues installing mine on the 68 works OK. The old one was corroded so badly I was told that it would not be worth the trouble to replate it.

BananaDan

#2
March 17, 2011, 10:06:31 AM
Mine was loosey goosey, you could wiggle the shifter shaft in any gear (she wouldn't change gears, but she wasn't tight).  It seems that the gap on the bottom of the shifter shaft where the spring and metal tab that sticks out of the shaft to catch on the shift plate was widened through excessive use.  I assume getting a new one will be nice and tight?

Dan
*This post brought to you by Carl's Jr.®*



Great spirits have always encountered violent opposition from mediocre minds. The mediocre mind is incapable of understanding the man who refuses to bow blindly to conventional prejudices and chooses instead to express his opinions courageously and honestly.  ~A. Einstein
Print
Go Up Pages1
User actions