Power Steering Cooler Question (part number look-up request - 3643482)

[69RTSE]

What Power Steering Cooler does this apply to.  I need one for a 69-71 Dodge with 440/Saginaw.  I bought this years ago for that application, but it seems a bit different from the correct one I have seen in different posts.  It has number 3643482/Blissfield stamp on the back.  Thanks.

[tan top]

that one looks like it could be  for a small block  

this is a nos  69 440 saginaw  B-body cooler  

[69RTSE]

Thanks.  I didn't know small blocks came with power steering coolers.

[69RTSE]

Also, how much should I pay for the correct cooler.

[tan top]

if your searching for a original used one , becareful of rust on the top bend !! tiny pinholes , you can easily think !! oh that's  
just rust pimpling  , start wire brushing etc & its gone through ,  ask me how i know ,  could of brazed it up but , wern't cheap , so sent it back !!  
if it were me  would  get a repoped one  but they are not cheap !over $300 ++
 

http://www.megapartsusa.com/proddetail.asp?prod=170%2DPSC162%2D0459

also GlennRay radiators sell them  , think these are the guys who actually make the repops

[Chatt69chgr]

Were those same coolers used on some ford products? 

Also, I wonder if someone makes a universal piece that could be adapted.  I'd like to have one but refuse to pay $320.

[69RTSE]

I agree.  I would hate to spend 300+ on a cooler.  I see an NOS one on Ebay right now for 800+.....Ouch.  I have been looking at the cooler I have and may be able to modify it.  The hardest part will be bending the tubes to the appropriate angels (or close enough) without kinking them.

[tan top]

I agree.  I would hate to spend 300+ on a cooler.  I see an NOS one on Ebay right now for 800+.....Ouch.  I have been looking at the cooler I have and may be able to modify it.  The hardest part will be bending the tubes to the appropriate angels (or close enough) without kinking them.

think i would investigate the part number of the cooler you have  , before you try to modify it , because small block coolers on E -bodys are rare ,& i think thats the one you have !! ( could be worth something to the E-body mob)  don't quote me on this though , i could be getting mixed up . !!  but would check it out with someone who knows  part numbers & stuff    

[69RTSE]

Thanks for that info.  Does anyone have a parts book for 1970 E-Bodies.  My book is for 1969 and will not have that number.  3643482.