2nd gen Charger stock sway bar mounts...Where to get?

[madmike]

I'm piecing my '68 Charger back together from a rolling shell.  I found a front sway bar, and I think the links that attach to the lower control arms.  I think I also found the sway bar mounts that mount to the K-frame.  One appears decent, but the other is in terrible shape (looks like it was ground clear through, as if the car was towed with the rear in the air, and the front on the ground...).

Since all of my sway bar stuff appears to be stock and present (except for the front mounts), is there anywhere I can get just the front mounts?  Thanks!

[Back N Black]

I used this kit from Energy Suspensions.

[myk]

I think the 'OP is looking for stock brackets.  Some folks don't like the idea of drilling through their frame for the aftermarket brackets...

[bull]

No one makes a true stock reproduction bracket so you're stuck trying to find a good used one on Ebay and whatnot. All the aftermarket guys want you to drill holes in your k-frame but I wouldn't do it, and since mine were still half decent I reused them. I took a year or two off my life getting the bushings on the bar/in the mount though. It's kind of stupid that no one produces a two-piece sway bar bracket that mounts up like the stock ones. It would make life a lot easier.

[BigBlockSam]

i like those, with a grease fitting too .