Question On Mustang Bullitt Wheels

[JMF]

I've got someone interested in the Bullitt wheels i'm selling that came off a 2007 Mustang GT, see link, does anyone know if they would fit his 72 Dodge Challenger ? Thanks for any help

http://www.ebay.co.uk:80/itm/ws/eBayISAPI.dll?ViewItem&item=200789985911&ssPageName=ADME:L:LCA:GB:1123

[Kern Dog]

Common topic.
These wheels have the same bolt pattern, but the center register/hub hole is small and needs to be hogged out. Some guys use spacers. Even then, the deeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep negative offset of those wheels tucks in too far. Our classics have large fender overhang and require wheels with less backspacing.

[Steve P.]

Agree with above. Have seen many on mopars, but correct spacers are needed to put the wheel where it fits nice in the well... Typically the spacers don't have a centering lip...

[Cooter]

With all the Aftermarket "Bullitt" wheels out there, I'd just buy the correct ones instead of buying a cheap set off Ebay and having to spend big bucks trying to make then fit an older car.

[Steve P.]

Many times you can buy both wheels and adapters for under $300.00. Sometimes with tires.. There is definitely a market.   

[Ghoste]

They're a good looking wheel, I would think they'd be an easy sell to someone with a later model Mustang.