News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

upper control arm cam bolt?

Started by 1969T5, February 18, 2011, 12:38:41 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

1969T5

February 18, 2011, 12:38:41 PM
What direction do they go in? I have searched on here and some say that the nut should be in the engine compartment and others say the nut should be on the inside of the a-arm. My service manual does not say and has a picture showing only one of the bolts going with the head of the bolt in the engine compartment. Who's right?  Thanks

John_Kunkel

#1
February 18, 2011, 05:16:27 PM

They came from the factory with the nut inside the engine compartment, that's the way they should be.
Pardon me but my karma just ran over your dogma.

Just 6T9 CHGR

#2
February 18, 2011, 09:15:06 PM
:iagree:
Chris' '69 Charger R/T

1969T5

#3
February 19, 2011, 09:09:49 PM
Thank you!

maxwellwedge

#4
February 20, 2011, 06:36:05 PM
Quote from: John_Kunkel on February 18, 2011, 05:16:27 PM

They came from the factory with the nut inside the engine compartment, that's the way they should be.

John - There is a good joke in there somewhere!  ;D

gtx6970

#5
February 21, 2011, 07:31:12 AM
Quote from: John_Kunkel on February 18, 2011, 05:16:27 PM

They came from the factory with the nut inside the engine compartment, that's the way they should be.

and your alignment guy will thank you for doing it this way.
put the nuts on the tire/suspension side and you may hear from him, but it's not going to be thanks
Print
Go Up Pages1
User actions