News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Gas sending unit adjustment

Started by billschroeder5842, February 27, 2011, 03:04:02 PM

Previous topic - Next topic

billschroeder5842

Hey All! Any ideas on how best to adjust my send unit/float? My '69 reads 2/3 full when topped off and sitting flat. When I get on a small hill and give the ca a bit of a rake (rear up, nose down) the guage will read full.

If I pop the sending unit out of the tank how is the best way to adjust this?

Thanks!
Texas Proud!

A383Wing

Bend the float arm down a bit when you remove the sender...you may have to do this more than one time..make sure tank has less than 1/2 tank of gas when removing sender