A couple of questions concerning charger parts...

[69Charger_440]

Just wanted to see if anyone had any new input on several of these questions that I have:

1.  Has anyone bought and installed the AMD 68-70 Charger Valance Corners?  If so, how was the fit?  Any issues?  The reason I am asking is because I believe someone else was reproducing these before AMD, and there were issues with the way they fit.

2.  Approximately 1-2 months ago there was a thread made or was part of a thread concerning a "new" attempt in reproducing charger grilles.  I don't believe it was the old scam artist (who was located in McKinney, TX ?).  Anyhow, I searched for the thread, but can not find it.  My question is, does anyone remember who it was that started the thread or if they are actually going to be reproduced (hopefully by a legit company this time).  Although I do remember that in the thread, there was a big letdown on the way they were going to be reproduced.   

3.  I'm shopping for a trunk floor pan and I was wondering if anyone has done business with some of the AMD distributors advertising discounts for member on this site?  Has anyone else found better prices for AMD parts somewhere else? 

Any input would be greatly appreciated.

Thanks!!

[twodko]

Just wanted to see if anyone had any new input on several of these questions that I have:

1.  Has anyone bought and installed the AMD 68-70 Charger Valance Corners?  If so, how was the fit?  Any issues?  The reason I am asking is because I believe someone else was reproducing these before AMD, and there were issues with the way they fit.



2.  Approximately 1-2 months ago there was a thread made or was part of a thread concerning a "new" attempt in reproducing charger grilles.  I don't believe it was the old scam artist (who was located in McKinney, TX ?).  Anyhow, I searched for the thread, but can not find it.  My question is, does anyone remember who it was that started the thread or if they are actually going to be reproduced (hopefully by a legit company this time).  Although I do remember that in the thread, there was a big letdown on the way they were going to be reproduced.

The guys board name is BobFist. He says his grille pieces will be made in Sweden. 

3.  I'm shopping for a trunk floor pan and I was wondering if anyone has done business with some of the AMD distributors advertising discounts for member on this site?  Has anyone else found better prices for AMD parts somewhere else?

I found myself needing a new hood for my 69. I checked AMD's website for local distributors of their products. Found a dealer close by and the hood was cheaper through them. AMD website has a link to authorised dealer for your area. Good luck  

Any input would be greatly appreciated.

Thanks!!

[69Charger_440]

Thanks!!  I found the thread on the grille reproduction, and I'll be checking the AMD links.

I would still like some feedback on the AMD valance corners if anyone out there installed them.  Thanks!!

[UH60L]

Well, I bought them, but I also replaced the rear valance, and both quarter panels and both trunk floor extensions at the same time, and it was all done by a body shop.  They never mentioned any problem with the fit, and they look good all installed and painted....