Are inner and outer tie rod ends any different?

[bull]

When I looked my PST steering/suspension kit over I noticed what appears to be two different types of tie rods ends. Two of them seem to have more of an inward angle to them than the other two. Is there an inner pair and an outer pair? If so which is which?

[471_Magnum]

Not as far as I know. Just the threads. Inners get LH threads.

[ACUDANUT]

Not as far as I know. Just the threads. Inners get LH threads.

Yep...
You know what pisses me off, PST never sells "the complete" kit with inner and outer tie rods. OR it's not included in their package deal. WTF

[bull]

Not as far as I know. Just the threads. Inners get LH threads.

Yep...
You know what pisses me off, PST never sells "the complete" kit with inner and outer tie rods. OR it's not included in their package deal. WTF

Really? I got a PST kit and it had four tie rod ends.

[68RED4SPEED]

I got my kit 2 weeks ago and there were also 4 tie rods, I bought that one for $379, I will take a closer look tomorrow.

[The70RT]

I think inner and outer are the same...just the left or right make a difference. When I did mine I upgraded to the C body sleeves & ends, they fit the same but are more heavy duty.

[troutstreamnm]

As stated before, just need left and right hand thread pairs for each side.

[bull]

Not as far as I know. Just the threads. Inners get LH threads.

Ok, that tells me which end goes where.

[ACUDANUT]

Not as far as I know. Just the threads. Inners get LH threads.

Yep...
You know what pisses me off, PST never sells "the complete" kit with inner and outer tie rods. OR it's not included in their package deal. WTF

Really? I got a PST kit and it had four tie rod ends.

Hmmm, I thought their add picks still show only 2 

[bull]

I believe it depends on which one you get.

The super kit: http://www.p-s-t.com/pc-1815-157-dodge-charger-1966-76.aspx
Or the regular kit: http://www.p-s-t.com/pc-1812-156-chrysler-rwd-1959-89.aspx