Were these crane rocker assy put in wrong? I'd say yep but

[oldcarnut]

I'd like to make sure just in case I'm missing something.  I took these Cranes off a running motor to replace a few noisy lifters and put stock rockers back to save these for my current build.  For curiosity I removed one rocker and found the oil holes pointed up and forward just opposite the stockers. Both sides were like this.  Am I missing something or did somebody install these backwards of what they should be?  A performance engine shop I was told built the motor.  Anything detrimental I should I be looking for before putting on the new motor?

[firefighter3931]

Yep...installed backwards. 

The oil holes should be down and pointing towards the exhaust ports. 

Just check the fulcrums for signs of gauling & abnormal wear.


Ron