bronze tip fuel pump push rod

[komninon]

does it work well with roller cam on the street?
how long will it take to wear out?

[firefighter3931]

does it work well with roller cam on the street?
how long will it take to wear out?

No Personal experience but by all accounts the bronze tipped pushrod works great. Reports i've read are showing several thousand miles and no wear. I'd use one if the build was mild enough and i wanted to run a mechanical pump.



Ron

[komninon]

Ron, it would be for my stroker motor.i am using the carter mechanical right now.

[firefighter3931]

George ; if that's the 120gph street pump you will be fine. 


Ron

[TUFCAT]

I see Mancini sells "brass tip" for roller rockers .....I didn't know bronze was available. 

[Purple68]

I've got the Mancini one in my roller cam motor. Only one season but it's good so far. 

[quadram4]

The brass tips are a must for a roller set up

[FLG]

If I'm running a non roller setup do I get the brass tipped push rod or the std one?

[firefighter3931]

If I'm running a non roller setup do I get the brass tipped push rod or the std one?

The std pushrod is fine. 


Ron