superbird nose gasket

[sound5262]

will someone tell me or provide pics of where all the gaskets go. i bought the tube ones that o assume go in between the nose and the fenders, but i also got the flat cut out ones that i don't have a clue. all of these came from year one i believe. thanks to all

[nascarxx29]

Superbird nose seal go on the nose edges you dont want to see the rubber .They dont go between like the daytonas. You might find detailed info on posts by corndogcharger AKA Justin posts

[oldcarnut]

Heres a picture I have if it helps.  Seals are # 2, 3, 14, 19, 20, 21 ,22, 23

[62 Max]

And this is all you should see,if you put it on backwards,the nose will extend 1/2" too far forward then the latch tray bolts wont line up with the supports..

[nascarxx29]

The superbird part list and part numbers good reference material
http://www.superbirdbob.com/superbird-parts-list/superbird-parts-list/ and you can download a copy
http://www.superbirdclub.com/BirdPartsList.html
And for the 69 daytona parts and parts# illustration
http://www.dodgecharger.com/forum/index.php/topic,26247.msg286371/topicseen.html#msg286371

[62 Max]

Dave,as you know there are 22 pages to the list,the ones listed are far from complete.

[nascarxx29]

The book you find in the trunk bound in black spiral I have it.And the fleet engineering book.And this ? book has 69 Charger 500 iluustrations

[Arnie Cunningham]

In the blown up photo:
20 goes between the radiator support and the K frame.  Don't bother trying to get it to fit.  The aftermarket ones are too thick, too heavy and too floppy.  It is held in place with b body speedometer cable clips.
21 covers the hole in the radiator support next to the battery.  I too would like to see examples of the original hardware used to attach this.
22 is the rectangle one with a slot in the middle.  It covers the U shaped opening in the bottom of the nose cone area.  It is held in place with two nut/washers like the ones that clamp down the throttle cable in the bracket and two plastic push pins that can be found on a New Yorker.
19 is the foam strip that goes between the radiator tank and radiator support.
23 fits the nose opening in front of the wheels.