"rare find" on ebay HAHAHA

[69charger2002]

http://cgi.ebay.com/ebaymotors/68-69-70-CHARGER-GENERAL-LEE-RESTORED-BIG-BLOCK-/270692530356?pt=US_Cars_Trucks&hash=item3f068838b4

yep, rare find.. to find one that incorrectly done!!     i honestly think he has so much armor all that if you went to get in the driver's seat you'd fly right out the other side... let's count the wrong things.
i'll start

1. Jeep Cherokee wheels

[bill440rt]

let's count the wrong things.

Uh, the mileage??   

[HOTROD]

2. Its a 1970 !

[Bobby41909]

What a mess...make a great jumper

[MoparManJim]

That push bar is wrong and doesn't even look right not even on the car. Looks more like a dang handle then it does a push bar   

[oldgold69]

black interior  that looks like new finish the once a year car polish on the interior not armorall

[jaak]

Wow, I believe the brush guard on the front will arrive a minute or two....before the car gets to where its going. That being said....Its still a '70 Charger, nothing fresh paint and new interior couldn't fix 

Jason

[4aThrill]

love the engine/trunk compartment color Black not body color hmmm 

[greenpigs]

Factory AC car....but nothing remains of it under the hood.

Are those the correct style seats for a 70?

Not wrong but the engine bay is rattle canned black(look at ECU).

Spare is from a Jeep also I think.

They forgot the two door panel pieces.

Yet again not wrong but it looks like I see orange peel in some pictures.

[SpudRacer]

Background on gas cap should be black, shouldn't it?

[bull]

I think it would take less time to list the things that are right.

[doctor4766]

No blackouts around the tail panel

[tan top]

    sounds & looks like a halpeg or bk special  

[Tilar]

i honestly think he has so much armor all that if you went to get in the driver's seat you'd fly right out the other side... let's count the wrong things.
i'll start

1. Jeep Cherokee wheels

Are you sure that's armor all and not high gloss black paint?  And the instrument panel is painted orange. That engine bay looks like crap. 

[ChargerSG]

They will still get it sold

[1969chargerrtse]

Why do people take pictures with the head lamp doors half open or mismatched?

[69charger2002]

all good catches so far. yes those appear to be factory style70 seats, but that car originally had a bench seat, not buckets. Also being an XH29 car it never had the upper door pads, which is why you see no holes in the steel except for the door lock and mirror. My favorite is that the car is half sleeping with the headlight motor obviously not working. Sad thing is in 70 you can crank the motor by hand and make them shut, no reason to take pics with the doors half up. i am not one to make fun of others cars, but since it's on ebay for the picking, and it's a dealer who obviously knows nothing or has any emotional attachment to the work done to it, it's fair game.

[chargermike]

i hate when people make generals out of 70s. just look wrong.  i would repaint it first thing and change the wheels. throw on a tail stripe. make it a nice 70 char ger.  but for that money i would just start fresh with a cheaper car and do it right. its rare all right and hope to never see another one. 70s make ugly generals sorry.

[DC_1]

I think the pics with the half open headlight doors are fitting for that car. It feels as ridiculous as it looks! And the guys write up, I think he has stayed up and watched infomercials or shamwow commercials a little too often! I think that push bar is a handle stolen from a cart from Home Depot.

[ACUDANUT]

 I agree with you all, but remember we have folks here wanting that price for a non-running charger, that's in a thousands pieces.

[troutstreamnm]

69 taillights with trim on a 70, missing upper door panel pads, the ugliest dash and console paint scheme you could think of, missing jack and what is that paint on the bottom side of the hood.    Someone should go to jail!  

[ACUDANUT]

 "Missing a Jack"  are you serious ??  Who uses a dangerous, old fashion jack on a Classic Car these days ??

[69charger2002]

69 taillights with trim on a 70, missing upper door panel pads, the ugliest dash and console paint scheme you could think of, missing jack and what is that paint on the bottom side of the hood.    Someone should go to jail!  

haha i agree with you on the color of the dash, but one thing a lot of people don't realize. those 69 style taillights on a 70 base model are correct. they didn't have those finish panels.

[Back N Black]

69 taillights with trim on a 70, missing upper door panel pads, the ugliest dash and console paint scheme you could think of, missing jack and what is that paint on the bottom side of the hood.    Someone should go to jail!  

XH29 car it never had the upper door pads.

[skip68]

I seem to remember that car for sale a long time ago.   ?

[KSChrgr68]

i say flood the ebay auction seller with questions/errors about the car...

[BigBlackDodge]

It's an XH car with a '500' badge on the left head light cover.



BBD

[TylerCharger69]

It just might be a "polished turd" like what BK sells???

[XS29L9Bxxxxxx]

Wow, do you cheer because another one was saved, or cry over one being ruined? 

[Chad L. Magee]

all good catches so far. yes those appear to be factory style70 seats, but that car originally had a bench seat, not buckets. Also being an XH29 car it never had the upper door pads, which is why you see no holes in the steel except for the door lock and mirror. My favorite is that the car is half sleeping with the headlight motor obviously not working. Sad thing is in 70 you can crank the motor by hand and make them shut, no reason to take pics with the doors half up. i am not one to make fun of others cars, but since it's on ebay for the picking, and it's a dealer who obviously knows nothing or has any emotional attachment to the work done to it, it's fair game.

I noticed the 70 base model stuff rather quickly when looking at the inside shots (did this before looking at the supplied vin information).  Rear panel on 70 XH29s were body colored, with an exception of black around the openings of the holes for the taillights.  It was a column shift car at one time, but converted over to floor shifted auto now....

[nvrbdn]

if the car has been restored  and has been done very well at all, it wouldnt take much to put it back as a nice 70 charger. arent the lines going the wrong direction on the back seat?

[Bobs69]

all good catches so far. yes those appear to be factory style70 seats, but that car originally had a bench seat, not buckets. Also being an XH29 car it never had the upper door pads, which is why you see no holes in the steel except for the door lock and mirror. My favorite is that the car is half sleeping with the headlight motor obviously not working. Sad thing is in 70 you can crank the motor by hand and make them shut, no reason to take pics with the doors half up. i am not one to make fun of others cars, but since it's on ebay for the picking, and it's a dealer who obviously knows nothing or has any emotional attachment to the work done to it, it's fair game.

Well put!  That's an honourable way to put it.

[ramairthree]

I would not pay the asking price for it,
but I would drive the hell out of it if it fell into my hands.

[TUFCAT]

I think it would take less time to list the things that are right.

[UH60L]

Ahhh yes.  This reminds me of when I was looking for a '69 on e-bay to buy.  I would search for "69 charger" and get results that said 68 69 70 charger, and you never which year, or how much of each year the car was made from!

As someone else said, the first thing I noticed was that it appears to be a '70, of which none were used for the TV show, according to the few reliable sources I've communicated with.

There was so much armor all on the tires, I thought they were flat at first!

I'd be very afraid the drive that without a thorough going over.

[aussiemuscle]

generals out of 70s. just look wrong. 

i agree.

still, it could make someone a charger owner.

[Road Dog]

Car is as wrong as "Beau" Duke!

[ACUDANUT]

 I would like to see all you "purist" out there and pick apart your cars.  You see, I also have a 70 Charger like this one, with a colorful past (not a GL clone)...  My 70 Charger, which  I bought back in the 80's has a '68 interior to include the dash and steering column.  Back then I did not know this, however I could care a less about it being "correct"....It's still a fun care and I love it.  To each his own.  20K for a decent 2nd gen is hard to find. I have seen "project" cars here advertise for 20K and they were in pieces and had no engine or trans.

[SRT-68]

It looks like a good driver to me. I wouldn't care about the little stuff that is wrong. Yank off the push bar and hit the road.

[viper r/t]

On topic to this car, where the rear upper door pads would go on an XP, what goes there on the XH cars? Is that metal, made on to the structure of the car like the 1st gen camaros or is it just the metal backing of the upper pads just not covered with fabric? Stupid, and basic question I'm sure, but I'm building an XH model right now and was wondering what I need to buy?

[MoparManJim]

On topic to this car, where the rear upper door pads would go on an XP, what goes there on the XH cars? Is that metal, made on to the structure of the car like the 1st gen camaros or is it just the metal backing of the upper pads just not covered with fabric? Stupid, and basic question I'm sure, but I'm building an XH model right now and was wondering what I need to buy?

That would be all metal. My car has no upper pads yet either. But the one in the photo, it appears they filled the holes in on the upper area where the upper door pad would clip on though. 

[XS29L9B2]

that is a big horror 

in this interior full orange on the gauge and a console 

[PocketThunder]

Is this graph in the auction correct?      

[Vainglory, Esq.]

Could be, but it's terribly misleading.  They cherry-picked the classic cars in their index and compared them to the Dow and the S&P.  To make it a valid comparison, you'd need to include more than just a handful of highly desirable cars in your index.  I doubt you'd see a positive rate or return on your run of the mill 1974 Polara with a 318.  Then there's the fact that the chart shows 1998 - 2008, rather than 2010.  Convenient that it picked rock bottom for a highly liquid securities market when there's plenty of information for 2009 and 2010.  Not to mention the lack of liquidity in the collector car markets makes real-time valuation a dicey process.

My opinion is that investments are investments, but your car and your house are more related to long-term consumer goods than capital.  If you don't want to drive your car, don't buy it.  If you don't want to live in your house, don't buy it.  I wouldn't buy into either one expecting to make a higher long-term inflation-adjusted rate of return than you'd get in the stock market.

Of course, when you look at what I spent on my car, it would take a minor miracle to even get my money back...

[Chad L. Magee]

On topic to this car, where the rear upper door pads would go on an XP, what goes there on the XH cars? Is that metal, made on to the structure of the car like the 1st gen camaros or is it just the metal backing of the upper pads just not covered with fabric? Stupid, and basic question I'm sure, but I'm building an XH model right now and was wondering what I need to buy?

That would be all metal. My car has no upper pads yet either. But the one in the photo, it appears they filled the holes in on the upper area where the upper door pad would clip on though. 

MoparManJim is correct, it is just painted metal on the top of the upper inner door area on base model 70 chargers.  Easy to clean (wax), but prone to scratches when you rest your arm there.  When I first got my XH29C, I thought "Great, now I need to find nice upper door pads from a 70 for it" , but then I noticed that there was no holes for the mounting clips.  Later, I found out that the base model ones were designed to be the cheapest way to get into a 70 charger, with an bare bones advertised list price of $3001.00.  No wander there was no door pads in them. ...

Viper RT- If you want any pictures of mine for reference on XHs, let me know what area you want.  It is not restored yet (previous owner rattlecanned primer over the original paint and then Krylon Red topcoat, comes off with a little light sanding), so I can show you a few tricks on mine if I sand off the primer paint cover a bit.  I can tell you that mine had body color on the recessed rear area, with the exception of black inside the holes for the taillights.....

[viper r/t]

On topic to this car, where the rear upper door pads would go on an XP, what goes there on the XH cars? Is that metal, made on to the structure of the car like the 1st gen camaros or is it just the metal backing of the upper pads just not covered with fabric? Stupid, and basic question I'm sure, but I'm building an XH model right now and was wondering what I need to buy?

That would be all metal. My car has no upper pads yet either. But the one in the photo, it appears they filled the holes in on the upper area where the upper door pad would clip on though. 

MoparManJim is correct, it is just painted metal on the top of the upper inner door area on base model 70 chargers.  Easy to clean (wax), but prone to scratches when you rest your arm there.  When I first got my XH29C, I thought "Great, now I need to find nice upper door pads from a 70 for it" , but then I noticed that there was no holes for the mounting clips.  Later, I found out that the base model ones were designed to be the cheapest way to get into a 70 charger, with an bare bones advertised list price of $3001.00.  No wander there was no door pads in them. ...

Viper RT- If you want any pictures of mine for reference on XHs, let me know what area you want.  It is not restored yet (previous owner rattlecanned primer over the original paint and then Krylon Red topcoat, comes off with a little light sanding), so I can show you a few tricks on mine if I sand off the primer paint cover a bit.  I can tell you that mine had body color on the recessed rear area, with the exception of black inside the holes for the taillights.....

That would be great. The area that has me puzzled is where the rear upper door pads would go. The general lee in the auction for example, where the rear upper door pads would go on an XP, the one on auction has solid metal, painted orange, but my car doesn't look anything like that. Mine has the area for the rear upper door panel mount to go on, but what goes on that?

[Martian R/T]

that is a big horror 

in this interior full orange on the gauge and a console 

Oh come on, I love the orange dash and center console.  I think I will get a can of krylon from wally world and paint all my Woodgrain..

[doctor4766]

That would be great. The area that has me puzzled is where the rear upper door pads would go. The general lee in the auction for example, where the rear upper door pads would go on an XP, the one on auction has solid metal, painted orange, but my car doesn't look anything like that. Mine has the area for the rear upper door panel mount to go on, but what goes on that?
[/quote]

Isn't it just an unpadded steel version of the doorpad on those cars?

[viper r/t]

That would be great. The area that has me puzzled is where the rear upper door pads would go. The general lee in the auction for example, where the rear upper door pads would go on an XP, the one on auction has solid metal, painted orange, but my car doesn't look anything like that. Mine has the area for the rear upper door panel mount to go on, but what goes on that?

Isn't it just an unpadded steel version of the doorpad on those cars?
[/quote]


That's kinda what I'm thinking but yeah...

[Daytona R/T SE]

That would be great. The area that has me puzzled is where the rear upper door pads would go. The general lee in the auction for example, where the rear upper door pads would go on an XP, the one on auction has solid metal, painted orange, but my car doesn't look anything like that. Mine has the area for the rear upper door panel mount to go on, but what goes on that?

Isn't it just an unpadded steel version of the doorpad on those cars?

That's kinda what I'm thinking but yeah...
[/quote]







It's a painted, stamped piece of steel, similar to those used on the "lesser" B-bodies.

It has a different shape than the ones on the Coronet or Belvedere...

[Chad L. Magee]

I just got done looking at my XP29C project and it is just a thin metal panel that clips into place on the rear inner framework.  The panel mimics the look of the upper door, as it is painted the same interior color (mine is Charcoal).  I will see if I can get my digital camera to work and I will post a pic of it if it does.... 

[will]

I wonder if the spare door under the customer service window comes with the car. That extra dor sweetens the pot for me....

[The70RT]

Piss poor hand made rear seat covering. Back seat line pattern running vertical not horizontal