News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

mopar billet rocker shaft clamps

Started by greenrt_se, August 02, 2005, 07:59:53 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

greenrt_se

August 02, 2005, 07:59:53 AM
how wide is Mopar billet rocker shaft clamps? are they same wide like original clamps??

Beer

#1
August 02, 2005, 11:46:43 AM
Here are the smallblock ones.





Cheers
Beer
1973 Dodge Charger 402 Stroker Smallblock 414 HP/ 466 ft/lbs torque,  8 3/4" 3.91 Suregrip rear w/ DR. Diff disk brake conversion, CalTracs single leaf and Rear Suspension, VFN Bulge Hood, Running, needs interior completed, Had to give to Ex-Wife in divorce 2017...

greenrt_se

#2
August 02, 2005, 12:22:49 PM
I need measurment for 440 clamps,these whitch I have are shorter than original ones,so they gonna need a lot of shims,but if the mopar billets are same width like originals then I buy them

Beer

#3
August 02, 2005, 12:34:22 PM
Different part numbers...SB and BB

Call Mancini Racing
I found them helpful with my questions with my SB.

Toll-Free: 800.843.2821
Local: 586-790-4100
Fax: 586-790-4136

E-mail: info@manciniracing.com

Store Hours:
Monday - Friday
9:00 AM EST to
6:00 PM EST  Saturday
10:00 AM EST to
3:00PM EST


1973 Dodge Charger 402 Stroker Smallblock 414 HP/ 466 ft/lbs torque,  8 3/4" 3.91 Suregrip rear w/ DR. Diff disk brake conversion, CalTracs single leaf and Rear Suspension, VFN Bulge Hood, Running, needs interior completed, Had to give to Ex-Wife in divorce 2017...

greenrt_se

#4
August 02, 2005, 12:35:32 PM
whit my english, thats gonna be funny phonecall  ;D

Beer

#5
August 02, 2005, 12:38:13 PM
Ahhh
Finland  :icon_smile_big:
Did not notice til you made me curious...
1973 Dodge Charger 402 Stroker Smallblock 414 HP/ 466 ft/lbs torque,  8 3/4" 3.91 Suregrip rear w/ DR. Diff disk brake conversion, CalTracs single leaf and Rear Suspension, VFN Bulge Hood, Running, needs interior completed, Had to give to Ex-Wife in divorce 2017...

greenrt_se

#6
August 02, 2005, 12:44:42 PM
 :) powered by Perkele  ;) but if somebody have those mopar clamps in hand ,can measure them

Chryco Psycho

#7
August 02, 2005, 11:47:10 PM
I have not measured them but I believe they are the same width as they are not specified for use with a particular rocker arms

NorwayCharger

#8
August 05, 2005, 01:13:38 PM
Quote from: greenrt_se on August 02, 2005, 12:22:49 PM
I need measurment for 440 clamps,these whitch I have are shorter than original ones,so they gonna need a lot of shims,but if the mopar billets are same width like originals then I buy them

Hi greenrt_se

You can use them, i do :) 
AKA the drummer boy
http://www.pink-division.com

greenrt_se

#9
August 05, 2005, 04:53:25 PM
ok thanks Norway
Print
Go Up Pages1
User actions