how to remove damper?

[Brightyellow69rtse]

im taking my 440 down and for the life of me i cant remember how to take the damper off. i feel like an idiot for asking but i actually wanna get something accomplished today. 

[Challenger340]

Rent, or purchase a Harmonic Balancer Puller.

Some even come with an installer for when you are ready to re-install it.
No,
a hammer and 2X4 doesn't cut it.

[PA Dodger]

It's "keyed" on. Just remove the damper bolt and washer. Then you can use a damper puller or make your own. I used a piece of 1/4" steel with holes through it to attach it to the pulley mounting holes. Then thread a hole in the center of the plate for a long jack bolt.

But you probably knew that once you read the "keyed on" part.    

[Brightyellow69rtse]

yeah im an idiot i totally forgot i bought a puller pretty much as soon as i went back in the cellar i remembered. oh well dampers off and the cams out. now for the pistons and crank!