looking for stainless fender bolts?

[drifter69]

Anyone point me in the right direction. I would like to eliminate the posibilitys of rust and I think they would look nice. Not sure if they are out there or not. I know I can buy stainless bolts at the store but would like actual fender bolts.

[Orange Bird]

Try McMaster-Carr. If you can't find them there you won't find them. Most likely you will need a bolt and a washer as I don't believe they sell them as a single unit like the originals

[charger Downunder]

If your worried about rust put some grease on the threads. Paint the bolts and put them on with a six sided socket  to help prevent cracking the paint off.

[AKcharger]

I went to ACE hardward and got mine

[charger2fast4u]

does anyone have any pictures of there cars with stainless steel fender bolts? i'd like to see how they look on the car. i to was thinking of going this route with mine and wasn't sure where to get them at

[Chatt69chgr]

Most every good sized town has a bolt and screw place.  And your bigger towns usually have a mill supply that services the local industries.  These type places would be a good place to start.  Of course, everything can be ordered off the internet-----if you can determine who sells what you want. 

[drifter69]

Thanks guy's, I was just wondering if there was something factory looking or not. True Value here I come.

[knitz01]

Anyone Find SS spring nuts?

[bull]

What size and thread pitch are fender bolts?

Oh, BTW, don't substitute flange bolts for the correct captive washer fender bolts like one of my jackass body shop guys did. Once the serrated flange hits paint it digs into it and rips it off. You'd think you wouldn't have to tell a body shop guy stuff like this...

[bull]

You might not like the idea of using anything that would go on a Ford but http://blog.virginiaclassicmustang.com/ sells stainless captive washer fender bolts that look like they match. Once I find the specific link I'll post it. From their reply email:

"Curtis,

The bolt is a 5/16-18 (Coarse Thread)  Head size - 1/2 socket.  With washer the width is 3/4.

Thank you for visiting our website.

Regards,
Michelle"

[drifter69]

I am interested, as far as it being a ford bolt, it wont be after I put it in my mopar. I am not sure on the correct size, my car is not close by for me to check. If I can put stainless fender bolts in I will be happy. I know I can buy stainless bolts but fender bolt is what I want. I will be waiting to see what you come up with.

[bull]

I need to see if she'll tell me the length of the bolts but the bolts I got in my fender kit match every other dimension she gave me above, although their washer might be about 1/16" smaller in diameter. Anyway, here's the link:

http://www.virginiaclassicmustang.com/STAINLESS-STEEL-FENDERBODY-BOLTS-SET-OF-12-P3579C3460.aspx

[drifter69]

Thanks for the link. I will investigate more to see what I can get. Should be just the ticket.

[gtx6970]

As close as whats currentlly avail,afaik

I can get them in packs of 25 for $25

[bull]

As close as whats currentlly avail,afaik

I can get them in packs of 25 for $25

Where?

[Chatt69chgr]

Bill-----Thanks for chasing these parts down.  Will you be offering them by way of your A&M High Tech Website? 

[FLG]

Bill,

Ill take a set, where can we order?

[bull]

Bill,

Ill take a set, where can we order?

I couldn't find them on his website so you'll probably have to call him: 859-689-7893.
http://www.amhightechauto.com/

[gtx6970]

These are not a regular stocking item. as they are NOT anything close to OE which is what I prefer to stock.

call anytime during the day on my cell 859-992-3646

[FLG]

I'm more of a stray from stock, lol

As long as there correct in size for my 73 I'm fine with it, call ya in the am.

[bull]

These are not a regular stocking item. as they are NOT anything close to OE which is what I prefer to stock.

I hope they're somewhat close. Other than being stainless how different are they? What's the diameter of the captive washer?

Anyway, I tried calling today but you're not an easy man to get ahold of, Bill.

I'll post this for the others: sales@amhightechauto.com

[gtx6970]

5/16-18 thread count x 1.0" overall length , 1/2" Hex head, 7/8" Conical  washer diameter. main difference to me is there are NO head markings as the OE bolt whould have

most OE Mopar fender bolts are 5/16-18 and 7/8 overall length with either a 3/4" or 7/8" conical washer , so it's close , just not close enough for my primary customer base. Thus why I don't stock such an item.  There area lot of pieces I have avail , just choose not to stock because I'm not happy with the quality of such

A good example of this is the woodgrain shifter ball for console auto cars 69-72. I can get them but choose not to , 2 different companies make them and neither one is even close to original appearence

[bull]

I don't mind that they aren't marked but I don't like that the heads aren't cupped like the originals and those sold by the Mustang outfit I linked above. Your pics are showing that they're not cupped but I don't know if have you actually gotten some of these bolts or just a picture of them.

[FLG]

I dont mind cupped or non cupped (if were still talking about bolts  ) Ordered a set, will see em in 2 weeks when he gets em. How many fender bolts are there again? Will 25 do 2 cars?

[bull]

I dont mind cupped or non cupped (if were still talking about bolts   ) Ordered a set, will see em in 2 weeks when he gets em. How many fender bolts are there again? Will 25 do 2 cars?

Well, it doesn't matter and it does. To me they should look like fender bolts at least instead of regular bolts and fender bolts have cupped heads. Otherwise I might as well buy regular stainless bolts and washers because it would look the same on the outside.

I believe there are 18 fender bolts per car so 25 is not enough for two.