Will 71-72 Charger disc brakes fit my 69 Charger

[69TwoTimer]

Can anyone tell me if the disc brakes on 71-72 Chargers will fit a 69 Charger. The 69 has 17" aftermarket rims and power assist drum brakes right not.

[ACUDANUT]

 I believe so!!

[terrible one]

They should. I used the spindles and rotors from a '73 Charger on my '68 and everything is all good. Used '71 Challenger calipers too for what it's worth. The Charger calipers have a different spot where the brake hose connects and it hit when I was trying to use them IIRC. 

[ACUDANUT]

What does IIRC mean ?

[terrible one]

If I remember correctly. 

[Cooter]

The '71-'74 charger Spindles will work, the only difference being IIRC, is the fact that they are a bit taller because of the Rubber Bushings between the K frames on those cars....IT actually helps the front end alignment to be a little taller...

[no318]

The '71-'74 charger Spindles will work, the only difference being IIRC, is the fact that they are a bit taller because of the Rubber Bushings between the K frames on those cars....IT actually helps the front end alignment to be a little taller...

73 and up have the rubber bushings and different (taller) spindles.  71 and 72 should work since they do not have the isolaters.  (IIRC.)

[69TwoTimer]

Thanks for the info!!

[Nacho-RT74]

the only diff between 66/69s and 70/72s are the sway bar bracketing. Rest is the same front end.

then 73s are diff monsters, BUT spindles can be used as stated with as far I know just some diff ride height deal

[7dcharger]

I have 71's on my 70. Fit without issues.

[ACUDANUT]

the only diff between 66/69s and 70/72s are the sway bar bracketing. Rest is the same front end.

then 73s are diff monsters, BUT spindles can be used as stated with as far I know just some diff ride height deal

And you can adjust the ride height anyway.

[Nacho-RT74]

I have 71's on my 70. Fit without issues.

sure, they are the same. Crossover was in 69/70

the only diff between 66/69s and 70/72s are the sway bar bracketing. Rest is the same front end.

then 73s are diff monsters, BUT spindles can be used as stated with as far I know just some diff ride height deal

And you can adjust the ride height anyway.

ride height can be adjusted on any Mopar.