News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

727 transmission dip stick question

Started by AirborneSilva, February 01, 2011, 04:08:59 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AirborneSilva

February 01, 2011, 04:08:59 PM
Probably a dumb question but I will ask anyway, how far out of the dip stick tube should the dip stick extend into the pan?  I took off the pan on a charger (73), I just picked up to change the filter and noticed the dip stick was protruding (got tired of typing stick so I couldn't say sticking out - ah heck there I go!!  :icon_smile_big:), anyway it's sticking out maybe 3/4 of an inch or so.  I'm thinking this is correct since the filter is right on the valve body but wanted to ask and be sure...  Thanks

John_Kunkel

#1
February 01, 2011, 06:05:21 PM

With a stock stick/tube the stick protrudes about 5/16"-3/8" from the end of the tube. 3/4" is way too much.
Pardon me but my karma just ran over your dogma.

AirborneSilva

#2
February 01, 2011, 06:24:58 PM
Quote from: John_Kunkel on February 01, 2011, 06:05:21 PM

With a stock stick/tube the stick protrudes about 5/16"-3/8" from the end of the tube. 3/4" is way too much.

Thanks, I looked at it over a week ago so my memory may not serve me too well, it could be the 5/16 - 3/8.
Print
Go Up Pages1
User actions