News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Rubber K-Frame seal

Started by Richard Cranium, December 12, 2010, 12:24:43 PM

Previous topic - Next topic

Richard Cranium

Is there a diagram illustrating where the seal gets fastened to & what hardware is needed?

Thanks!  :2thumbs:
I am Dr. Remulac

62 Max

If you can figure it out.

Richard Cranium

Thanks for the pictures! 
Couple of questions:

1. Is the only thing that holds it in are the 2 clips per side orare there any hidden fasteners in the the lower radiator crossmember?
2. Who sells those clips?

Thanks again. :2thumbs:
I am Dr. Remulac

pettybird

the clips are speedometer cable clips which everyone from R/T specialties through Mega Parts sells.

my seals have been gone since we got the cars in the 70's but those four clips are still there on each car...I don't think there are any more.

nascarxx29

The clip is not wingcar special .Common speedometer cable clip Dave @ PCG also has them and other wingcar hardware
http://www.performancecargraphics.com/Winged_Car_Stuff.htm
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

Richard Cranium

How 'bout that!; now that you point it out, it's plain to see what they are! Am I correct in assuming that thosr are the only 4 things holding the flap on?

Thanks again for the help.
I am Dr. Remulac

A383Wing

when I put mine together, I drilled a few holes and used those little plastic push-in thingys that look like a Christmas Tree when you turn them upside down

hemigeno

Quote from: Richard Cranium on December 12, 2010, 03:34:00 PM
Am I correct in assuming that thosr are the only 4 things holding the flap on?

Yep, you are correct... those 4 clips are it.