wiper motor PN question

[Peters02]

I have a 72 charger.  The wiper motor has always been a two speed (my father purchased the car new hence I recall this fact).  The switch is a two speed also.
My issue is that the motor is dead.  The PN on it is 3431624.  Everywhere I search this part number comes up as a 3 speed motor. 
The coloring is goldish with the red paint on the body....again, indicative of pictures I see of a 3 speed motor.
Did 2 speeds look like this, also?
Any ideas where I can get another? (ideally without breaking the bank)

Thank you.
Peter

[Back N Black]

Try NAPA, they will send it out for rebuild, i had one rebuilt last year for $80.

[Nacho-RT74]

3 and 2 speeds are very diff monsters... 3 speeds is with horizontal armature, goldish finish and 2 speeds are vertical armature, painted black

[CDN72SE]

Here is mine from a late model 72 three speed. Part numbers:
3431624
3692
1152

[Peters02]

thanks guys.  Mine is gold as in the picture but I do not have the black cover on the motor- two leads and painted red.
I wonder if it's cause mine is an early 72.

I will ask at NAPA.

Peter

[CDN72SE]

Hey Peter, the wiper motor off my 7-71 built 72 is as you describe.

[ODZKing]

As long as we're on the subject, is that wire that goes to the top terminal supposed to be bare like that? 
The used one I purchased is like that also. 

[CDN72SE]

That motor was from my first low-mileage car and as long as I owned it the wires were partially exposed like that.

[Peters02]

Thanks for the input.  Last week before I left for my recent travels I bench tested the motor using a process for a 2 speed.  Works like  dream - fast slow and park.  So my horizontal two speed works...just gotta figure out where the gremlin is between the switch and the motor.

Peter