News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dana60 rebuild, what do i need?

Started by kingjoop, December 02, 2010, 06:12:49 PM

Previous topic - Next topic

kingjoop

Today i got my Dana60 (http://www.dodgecharger.com/forum/index.php/topic,75761.msg850639.html#msg850639) and i want to rebuild it..

didn't opend it, don't know if it needs a rebuild, but i want it to be perfect before i install it on my Charger... all i know it has 4.10 gears...

What do i need to get this dana60 fresh again?

thnx..
1968 Dodge Charger R/T (8barrel 500Ci)
Only milk comes in 2 liters

My Charger is a hybrid car, it burns gas and rubber.

Hot Chicks and much more Horsepower: www.performancegirls.com

69rtse4spd

Do not know if you can do it your self, but you will need some special tools. I went to my local Dodge dealer & talked to the guy that dose their drive train work. I had him do my Dana 60 after I bought new clutch pack plates, & I think it was around $250.00, he set up the 3.73 gears also. He is also putting a 489 pig with 3.55 sure grip together for me. Just a note, check with your local dealer first on parts, clutch pack plates were the same as Summits price. The fine spline 7290 yoke was far cheaper then some of the big names sell them for.