Show me your original "A" pillar moldings...

[Daytona R/T SE]

I'd like to see some good, close up pictures of original Daytona, 69 Charger 500 and Superbird stainless "A" pillar moldings, both on and off the car, pics of the backside of the moldings would be good too...

Original moldings only, please...

[hemigeno]

I don't have any of mine on the car (they have been off since 1977), but here are a few I've taken:

[hemigeno]

One more for good measure.

Chris, if you need the hi-res picture files, let me know.

[xs29j8Bullitt]

Not exactly sure if these will help... but here are a few:

[xs29j8Bullitt]

Superbird Vs. Daytona/C500 attachment differences:

[xs29j8Bullitt]

Upper ends of moldings...

[xs29j8Bullitt]

I also have a bunch taken when I removed the moldings from my Charger 500... here are a few samples:

[Daytona R/T SE]

Gentlemen, Thank you.

That's EXACTLY what I needed.  

[Richard Cranium]

While we're on the subject, what kind of goop should be used to putty in the leading edges of the molding to the windshield? It kind of looks like dum-dum.

[nascarxx29]

My daytona had that caulk dum dum material even had fingerprints where it was installed by a worker