Suspension question?

[68ChargerJMP]

When installing the torsion bars, with no engine or any weight on the front end, where do I position the lower control arm swivel things? All the way down?, all the way up?, in the middle? Im trying to see where my ride height is going to be. Do I have to have weight up front to bring her down oto normal height ? Help please. Thanx.

[Rolling_Thunder]

well  with nothing up fron you are loosing at least 500lbs...    I would put the adjusters in the middle...   unless the engine and trans are in you cant really see the ride height accurately

[RallyeMike]

The control arm, nut socket and adjuster should be rotated down when you line up and insert the torsion bar hex. Be sure to put the left one in the left side and the right one in the right side. They should be marked L and R unless you are going with big aftermarket bars.

There is no way to simulate your ride height without some weight up front.

[68ChargerJMP]

Thanks for the input.