News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69 charger console wiring-HELP

Started by FARMER, November 17, 2010, 04:23:38 PM

Previous topic - Next topic

FARMER

hi;
I am workin on a 69 charger. The wiring harness that goes from the console to the front by the parking brake assembly, where does it connect too? How is the console lights and the drivers side door switch get put together in the circuit? I have a connection plug on the end of the console harness but see on the main branch there is nothing too connect to. The wiring was messed up and cut up. Can someone please help me. Thanks.

Back N Black


There are 3 different wiring harness in the circuit.
Harness #1  runs from the fuse box and end at the driver's kick panel.
Harness #2  from the kick panel down the  driver's side just below the sill plate and under the driver's seat.
Harness #3  the one with the light sockets that attaches under the console.



The orange & pink wires that come off the fuse box with the grey male connector The console courtesy lamps have yellow (M2-18Y) and pink (M1-18P) wires running to them. The pink wire terminates on the fuse box on the output side of the dome light feed fuse. The yellow wire is spliced into the yellow door switch wire near the emergency brake.




FARMER

Thank you. I will have to make up the harness from the kick panel to the fuse box.
It will be great to have lights. Again thanks so much for the information.
:icon_smile_wink: