News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Bending a Header

Started by Long Island RT, November 15, 2010, 03:34:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Long Island RT

November 15, 2010, 03:34:35 PM
Anybody have any luck bending a header up by by putting some pressure on it with a jack?

My passenger header hangs about 1" lower than the drivers side and is very visible from about 15 feet or so away from the car.  They are Doug's - 2" primaries with 3½" collectors coated with Jet-Hot Sterling.  Should I get them nice and hot?  will I snap it by the exhaust flange?

Thanks
1969 Dodge Charger RT Restomod<br />Triple Black, 512 stroker, Tremec TKO600 5-speed<br />2005 Dodge Magnum RT - Brilliant Black - Lowered
Print
Go Up Pages1
User actions