1970 Charger factory cruise control fire wall hole location

[Tom Q]

Where does the hole go in the firewall for the factory cruise control wiring harness??? pics?
Thanks for help.

[gtx6970]

Tom,
I'm going to assume ( I know bad idea) that 1970 B-bodies are the same or at least similar to 1970 E-bodies.
If so, there is a outward dimple on the firewall just to the side of the brake booster, that's the cruise harness location. ( sorry I can't remember which side it's on but it's towards the top of the booster plate, but I wanna say it's on the wiper motor side )

Can be kind of hard to see unless you know exactly where it's located. The hole required for the wiring grommet should be approx 3/4" in diameter

[The Charger Guy]

Hi
My friend is putting his car back to original, took the cruise off 30 years ago, forgets how cruise hooks to carb
Could you email pictures of carb area to me so I can send them to him please?
m-j.christiani@sympatico.ca
Mark

[b5blue]

Mine had C/C when new (still has the switch on the turn signal stalk) I'll post a pic of the firewall for ya this weekend sometime.