i need help finding a carb

[firefighter3931]

hey

i'm gonna order the 10 inch dynamic converter . is there anything else that i need for installation ? will it bolt up to my stock flex plate? any problem with starter?

while i'm there i will change out the front seal . thanks Rene

Good choice on the converter 

You will need a new flexplate with the 10" bolt spacing as well as larger 7/16" converter bolts. Mopar performance has this stuff and it's relatively inexpensive.

http://chucker54.stores.yahoo.net/mopsixbolsfi.html

http://chucker54.stores.yahoo.net/moptorconbol1.html


Ron

[greenpigs]

hey

i'm gonna order the 10 inch dynamic converter . is there anything else that i need for installation ? will it bolt up to my stock flex plate? any problem with starter?

while i'm there i will change out the front seal . thanks Rene

Wondered what I needed also, got a B&M flexplate off Ebay...was for a cast crank.

[lighting74]

take your cubic inch and double it that will get u your carb size or real close

[ACUDANUT]

 Edelbrock #1411 750cfm Carb with electric choke in parts section.