Anyone tell me what these part are?

[Bobby41909]

These parts came with my 69 Chagrer project in a bad labeled "Condenser Assembly" (I think..hard to read).  Can anyone confirm what these are for?

[Topher]

Looks like the receiver dryer bracket, and line clamps. I'm sure someone has pictures to post. If not, my buddies have one in their shop I can get pix from.

[super_dave]

I just pulled one of those off my motor.  Sits (on mine anyway 72 440) behind the carb, centre of intake along edge. Holds condensor.

[Just 6T9 CHGR]

Looks like the receiver dryer bracket, and line clamps. I'm sure someone has pictures to post. If not, my buddies have one in their shop I can get pix from.

Yes....reciever drier bracket as well as some A/C pipe clamps

heres mine back from powder coating

Installed on car

[Rolling_Thunder]

Flat Bracket -  mounts to passenger side inner fender
C shape strap - mounts to above bracket to hold the drier canister
Larger pointed Screws - usd to hold flat bracket to inner fender
Hex Bolt - used to tighten C strap to flat bracket
Two short straps - used on top of passenger inner fender to hold hardline from condensor to A/C Drier
one long strap - used on pass side top of radiator support to hold two hardlines (in and out) of the condenser
three small pointed screws - used to mount hardline straps

[Bobby41909]

Awesome...Thanks everyone...I love this forum