Electrolysis rust removal

[greasyspider]

I've been using electrolysis to take the rust off some of my parts and I must say it works AWESOME!   Anyone have any experience with this? I want to soak my control arms and linkages but I've heard that the metal can become brittle using this process.  However, I have also found webpages where guys have done leaf springs with no problems (at least no updates admitting problems.) 

[jpsycoboy5]

I've done this a lot to A LOT of rusty parts and I've never experienced the metal getting brittle

[Wicked72]

try this stuff http://evaporust.com/ Its amazing! I throw everything in it. I saved a few old knives that wouldnt even open. If you leave the metal in to long it turns black but it doesnt hurt anything. I have done the many pounds of bolts from my 3rd gen with it and they all look new. I sprayed them with WD 40 after they were done to keep them from flash rusting. Its only takes about an hour to make a few hand full of bolts look new.