3 Spoke Woodgrain Steering Wheel Horn Adaptor Installation - 69 Charger

[Johnnys440Charger]

I have a plastic horn ring casting 2996788, is this correct for a 69 Charger? 

Also, does anyone have a blown up diagram that illustrates the parts and order of installtion for the horn? 

[tan top]

can't recall ever seeing that part  on a 69 , when i took my column/wheel etc apart , although it was about 8 years back , could of forgotten( normally happens ) , i'll have a look later 

[Johnnys440Charger]

hmmm... perhaps the horn button setup differs from 69 to 70?

[Just 6T9 CHGR]

That spacer is only used on the '70 wheel.  The silver horn ring is different from the 68-69 & 70 as well.

The '68-'69 is tapered & sort of fits into the column.  The '70 is larger & goes over or around the column & uses the spacer....due to the fact that the column is larger in diameter due to the addition of the ignition key switch....

'68-'69 ring....



'70 ring



Pics borrowed from the BE/A Parts website
http://www.beaparts.com/list_items.aspx?body=B&cat=I&subcat=46

[Back N Black]

That spacer is only used on the '70 wheel.  The silver horn ring is different from the 68-69 & 70 as well.

The '68-'69 is tapered & sort of fits into the column.  The '70 is larger & goes over or around the column & uses the spacer....due to the fact that the column is larger in diameter due to the addition of the ignition key switch....

'68-'69 ring....



'70 ring



Pics borrowed from the BE/A Parts website
http://www.beaparts.com/list_items.aspx?body=B&cat=I&subcat=46

Makes sense, i have the wrong adaptor on my 69, i was trying to figure out why i had the gap. Learn something new everyday.