Can anyone help ID these calipers?

[BigBlockSam]

hey

i bought a disc brake kit for my charger and i would like to know what these calipers came off of . for future reference . in case i need to replace them in my future . thanks

[A383Wing]

Whats the other side of caliper look like?

<turn it around>

[BigBlockSam]

 

[A383Wing]

Rene.....those are GM pads.....but I'm not sure about the calipers....how do they mount to the spindle?

Almost looks like Ford calipers after closer inspection....could be Ford pads as well

[HOTROD]

 

[BigBlockSam]

so are they gm or ford?

[69rtse4spd]

Can you take the number on the back of the pad to NAPA, & have them tell you. .

[BigBlockSam]

that's no fun 

[Rolling_Thunder]

Those must be GM calipers -  who's kit did you purchase ?  MP brakes ?

[A383Wing]

Those must be GM calipers -  who's kit did you purchase ?  MP brakes ?

I have my doubts to that....GM uses sliding pins to mount calipers to the "bridge".....which is why I asked to see the other side of the caliper

[BigBlockSam]

who's kit did you purchase

i got this one . cost my wife $413 (it was my birthday present)
it looks good all heavy duty stuff.

http://cgi.ebay.com/ebaymotors/1966-67-68-69-1970-71-72-CHARGER-FRONT-DISC-BRAKES-KIT-_W0QQcmdZViewItemQQhashZitem3ca252e0cfQQitemZ260421378255QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[Rolling_Thunder]

those appear to be factory chrysler stuff...       

[BigBlockSam]

i think there mid 70's chrysler 

[A383Wing]

again I ask.....how are they held to the "bridge"?

[BigBlockSam]

i'll post a pic when i get them together . i'm gonna paint them and assemble them first . then install them as one piece . there for the daytona .

[A383Wing]

    

[HPP]

They look like OEM Chrysler, mid to late 70s, slider style calipers. The tabls on the ends of the calipers sit on the adapter bracket and a coulpe of sheet metal clips with a bolt hold them down. Replacement parts could come from Dart, Duster, Aspen, Volare, Fury, Cordoba, etc.

[John_Kunkel]

    They're F, J, M, R body calipers, check the rebuilder's pic below.

[HOTROD]

YES I see the penstar on them and they look like my 79 dodge magnum ones I just got in !!

[BigBlockSam]

Yes! thank you  i'm glad there Chrysler . i'll post a pic when i get them together 

[gtx6970]

late 70's - early 80's mopar slider calipers - common on Diplomats, Volares, etc etc

[Bobs69]

How about a picture from another angle, and maybe see the pads.........

[pullrock]

They look just like the set i am using on my 68.  Mine came off a 75 Dart/Duster.  I would say Chrysler calipers for sure.

Eric
68 Charger R/T

[grdprx]

I have that same caliper that I got with my kit.  I was told it's a 70's truck caliper.  Probably a wide useage across the board though.