News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

318-360 swap balancing question

Started by charger_cody, August 21, 2010, 09:06:05 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

charger_cody

August 21, 2010, 09:06:05 PM
Is the same torque converter from the 318/904 useable with a 360/904 combo?

If not can someone find me a part number?

Cody

Drop Top

#1
August 21, 2010, 10:28:30 PM
The converter on the 360 will have a balancing weight welded onto it. The 318 usually wont have that weight. It will be located on the starter ring side. Part numbers will vary from manufacture.

charger_cody

#2
August 22, 2010, 02:06:39 AM
Quote from: Drop Top on August 21, 2010, 10:28:30 PM
The converter on the 360 will have a balancing weight welded onto it. The 318 usually wont have that weight. It will be located on the starter ring side. Part numbers will vary from manufacture.

Can you still use the converter from the 318 with the 360?

Cody
Print
Go Up Pages1
User actions