Some new shots of the charger (more pics added)

[WHITE AND RED 69]

I'd like to possibly use a pic of that for my next Charger calendar with your permission but do you have it in jpeg format? Unless there's a way I don't know of to save a bitmap file that's not microscopic.

Very nice car. I had trouble last time getting the body lines of the white cars to show up very well in the reprint calendar pics but maybe this one will work.

If you need any photos for the calendar I can send you some larger ones. Feel free to use any photos. and if your selling these calendars put me down for one.

[charger01]

I have to admit.  I don't usually care for white cars, but every aspect of your car blends perfectly together.  Wheels, interior, guages and ofcourse the tail stripe.  One of the nices chargers I've seen in a long time. 

[elanmars]

very nice! if you have more photos, please post away! it's nice to see another white Charger. it'll be a while before I get to the cosmetics of my current Charger, will probably get rid of the vinyl top.

[FlatbackFanatic]

Great looking car!!!

[bull]

I'd like to possibly use a pic of that for my next Charger calendar with your permission but do you have it in jpeg format? Unless there's a way I don't know of to save a bitmap file that's not microscopic.

Very nice car. I had trouble last time getting the body lines of the white cars to show up very well in the reprint calendar pics but maybe this one will work.

If you need any photos for the calendar I can send you some larger ones. Feel free to use any photos. and if your selling these calendars put me down for one.

Very cool. I'll PM you my email address. I hope to have them printed and sent out this time around late Nov. I hope a white one woks this time.

[Brock Samson]

 that's one classy lookin Charger!  Nice choice of mods..  more pics always appreciated.. 

[WHITE AND RED 69]

Here is a few more. 

[ionracer24]

Friggin sweeeeeeeeet.......old skool chargers with modern equip look bad ass man!!

[1970Moparmann]

Great job-looks awesome!

[Darkman]

Friggin sweeeeeeeeet.......old skool chargers with modern equip look bad ass man!!

[JT01]

Where did you get the white gauges at? Love them

[69 rt]

Great looking 69

[WHITE AND RED 69]

Thanks everyone. glad others like it. 

Where did you get the white gauges at? Love them

I got the decals off ebay from a dealer in Canada. Item #300325681492 on ebay by the seller 01generalleehemi. $25 bucks for for all the gauges and the odometer wheel. The Tach was silkscreened white by Russ at Charger specialties but only the outside part. The inside I made my own out of the extra decals that I got off ebay. they are easy to install, its just cleaning off the old gauges so it has a good surface to stick to.

[doctor4766]

Got any other shots of how that B&M sits in the console?
I been thinking to fit a console in my Charger instead of the buddy seat but wondered if I could somehow incorporate the Quicksilver shifter in there.
Yours looks great from that pic.

[WHITE AND RED 69]

Got any other shots of how that B&M sits in the console?
I been thinking to fit a console in my Charger instead of the buddy seat but wondered if I could somehow incorporate the Quicksilver shifter in there.
Yours looks great from that pic.

I got lucky the way mine fit, as I put the shifter in way before the console. I put the B&M shifter as far back as possible with the buddy seat in so I had to fit the console around the shifter. If you do them at the same time it will fit a bit better than mine. At first I was going to cut the top plate to make the B&M plate to fit into it but when I put in the console in all I needed was to slide the console back a couple inches and I wouldnt need to modify the top plate. So I cut about an inch out of the plastic underneath the plate and it fit right against the shifter bracket. The only other modification was I cut apart the indicater lense holder so the shifter could move without hitting anything and cut the black plastic slider piece that the shifter fits through and it all worked out. The only bad part is the shifter light wont fit where it should be and the shifter doesn't line up perfectly with gear indicater but its close and works well enough for me.

[WHITE AND RED 69]

Here are a couple more I had on my camera. 

[doctor4766]

Got any other shots of how that B&M sits in the console?
I been thinking to fit a console in my Charger instead of the buddy seat but wondered if I could somehow incorporate the Quicksilver shifter in there.
Yours looks great from that pic.

I got lucky the way mine fit, as I put the shifter in way before the console. I put the B&M shifter as far back as possible with the buddy seat in so I had to fit the console around the shifter. If you do them at the same time it will fit a bit better than mine. At first I was going to cut the top plate to make the B&M plate to fit into it but when I put in the console in all I needed was to slide the console back a couple inches and I wouldnt need to modify the top plate. So I cut about an inch out of the plastic underneath the plate and it fit right against the shifter bracket. The only other modification was I cut apart the indicater lense holder so the shifter could move without hitting anything and cut the black plastic slider piece that the shifter fits through and it all worked out. The only bad part is the shifter light wont fit where it should be and the shifter doesn't line up perfectly with gear indicater but its close and works well enough for me.

Very cool.
I have the same shifter and fitted it exactly where you did.
I think I can even get my hands on a console locally too so I may as well give it a shot, since they wouldn't license my car as a 6 seater here anyway.
Cheers
Paul

ps. Are you planning to leave the column shift gear indicator on there?
It's fairly simple to remove. Only took me an hour or two and looks great.