bellhousing bolts and starter bolts for 70 440

[moparmendy]

Could someone please tell me the bolts sizes and number of each needed for the bellhousing and starter on a 70-440 sixpack motor with manual trans??

Please note that I do not care about original bolts, just need a good set to get the trans hooked up and starter.

all help would be greatly appreciated!!!!

trying to inch along in the process.   

garymendy@yahoo.com

[John_Kunkel]

Same as a 727.

The top four bolts are 3/8"-16 X 1 1/4" long.

The bottom two bolts are 7/16"-14, the starter side is 2" long and the opposite side is 1 3/4" long.

The starter stud goes on the bottom, it is 7/16" X 2". The top of the starter takes a 7/16"-14 X 1 1/2" bolt.

[moparmendy]

thanks!!!!!!