these rockers any good? link inside

[68chargerboy]

http://www.summitracing.com/parts/PRO-66868/

seem to be a VERY cheap price which is good for me let me know if im just burnin dollars if i buy them

[frederick]

Don't:

http://www.moparchat.com/forums/showthread.php?t=117922
And that's just one example, from the dozen.

You don't mention anything about your camshaft, but my guess is you'd be better of with a set of ductile irons.
http://www.summitracing.com/parts/CRN-64770-16/

If you really want to run a cheap roller rocker, look at these:
http://www.prwonlinestore.com/mopar-2.aspx
They got some good reviews on moparstyle and are bushed, adjusters are supposed to be better quality now.

But they are more expensive than the better ductile irons.

If you still want to run the proform rockers I suggest ditching the adjusters immediately and get some good ones from smith bros for example.

Cheers,

Frederick

[68chargerboy]

thanks for the link prw seems pretty decent.  do u know if these r ACTUAL prw products? says the manufacturer is prw but idk...

http://cgi.ebay.com/ebaymotors/BIG-BLOCK-MOPAR-SHAFTS-440-Aluminum-Roller-Rockers-/380153979782?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item5882f16386#ht_3399wt_1011

thanks  Zach

[Charger-Bodie]

I had the PRW stainless steel ones on my last stroker wedge,they worked perfect. The thing I really like about those is that you can use stock style pushrods.

[frederick]

They don't look the same to me, the writing on the rocker and the adjusters are different.
Plus the ebay-kit has the standard mopar hold-downs, prw-kit has machined hold-downs.

Cheers,

Frederick

[68chargerboy]

I had the PRW stainless steel ones on my last stroker wedge,they worked perfect. The thing I really like about those is that you can use stock style pushrods.

well hearing that is a little stress of my shoulders! 

They don't look the same to me, the writing on the rocker and the adjusters are different.
Plus the ebay-kit has the standard mopar hold-downs, prw-kit has machined hold-downs.

Cheers,

Frederick

found a prw rocker set for a decent price aluminum ones, not stainless.  theyre 1.6 ratio, with those rockers and my cam the lift will be 593in 615ex, think that much lift wil make too much spring pressure and crack them?