'69 ignition switch questions

[66FBCharger]

How does this switch come out? It appears like a special tool is needed to remove the retaining nut. Is it true that this ignition switch is a '69 only item? does anyone reproduce these?
I have no key for the ignition, can a locksmith make a key if he dissassebles the switch and checks out the pins?

[Troy]

The outer ring with the slots holds it to the dash. They are a 1 year only item. The switch is now being reproduced but I'm not sure about the lock cylinder. Yes, a locksmith can re-key the lock or make a key that works with the one you have.

Troy

[UFO]

I have unscrewed the ring with needle nose pliers.
Just be careful not to let them slip.

[Troy]

I have unscrewed the ring with needle nose pliers.
Just be careful not to let them slip.

Yeah, I've used a blunted screwdriver too.

Troy

[66FBCharger]

Thanks for the tips guys! I want to take it out and have a key made for it.
John

[UFO]

Once it's out of the dash,there's a spring loaded pin to push in.Use the key to help slide the cylinder out of the housing.

[66FBCharger]

How do you get the cylinder out if you have no key?

[UFO]

It will still come out the same way.
Just using a key makes it easier.
Does not have to be the right key.

[66FBCharger]

UFO,
Thanks!