FUEL PUMP PUSHROD

[Highbanked Hauler]

What about a Torx bit?

[A383Wing]

Torx bit is not tapered like the spiral easy outs...will probably make hole worse

[Bobs69]

What about a Torx bit?

Yeah that was suggested to me by a friend awhile back.  Wish I would have tried it now.  The hole is pretty bad now.  I think I'm going to try and get one of those spiral easy outs posted earlier that you don't need to drill a hole for.  I'll have to shop around and see where to buy it here or put it on my shopping list for when I goto the States again. 

Is this a tool that can be any brand name or is it benificial to get it from the Strap-On truck!  STRAP ON TRUCK haha I love that, thanks to whoever posted that.

[oldcarnut]

For no more than you'll probably use it, most any brand should work,  I cant remember the brand of the one in my work tool box but its not one of those high dollar names and we use them a lot with no problems.  Just make sure it made with good steel.

[Purple68]

I have used a product in the past called Screw Grab and it works pretty well. It works by filling the gaps between the tool and fastener and creates friction.

[Bobs69]

A welder.  Done