News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Trunk floor pan

Started by 66FBCharger, July 14, 2010, 11:00:57 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

66FBCharger

July 14, 2010, 11:00:57 AM
If I cut a 1/4 panel off, can I get a full trunk floor pan into place on a 69 or is cutting the taillight panel off the only way to get a full trunk pan into place?
'69 Charger R/T 440 4 speed T5, '70 Road Runner 440+6 4 speed, '73 'Cuda 340 4 speed, '66 Charger 383 Auto
SOLD!:'69 Charger R/T S.E. 440 4 speed 3.54 Dana rolling body

69*F5*SE

#1
July 14, 2010, 04:12:45 PM
I don't know about the quarter but you can fit a full pan through the opening of the rear valance once removed without removing the taillight panel.  You would also need to loosen the trunk latch bracket. But, it will go in this way.  Good luck   :2thumbs:
Print
Go Up Pages1
User actions