68 Door panel questions!!

[Red Ram]

OK...what a pain.

How does the chrome piece between the upper door panel and lower door panel attach... does it screw in? Pointy end towards the front? And are there any secrets for lining up the clips on the lower panel?

I'm thinking of putting the clips on one by one with the inside door pull attached. A little frustrating!

Thanks,

Brad

[Red Ram]

No answers? I see that there are holes on the stainless piece but it doesn't seem to work either way I position it. Right now I have the flat flush portion shoved under the upper pad...looks right but slides around quite a bit.

[squeakfinder]

Been awhile since I did mine, but they were screwed in. Pointy/beveled end is toward the front.

[Hemidog]

Been awhile since I did mine, but they were screwed in. Pointy/beveled end is toward the front.

[Red Ram]

Thanks guys...I bet I have left and right mixed up. The lower panel must tuck up over the flat screwed in part into that channel. 

[DC_1]

Thanks guys...I bet I have left and right mixed up. The lower panel must tuck up over the flat screwed in part into that channel. 

That's correct