News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 steering column restoration parts**PIC**

Started by runningman, July 10, 2010, 03:55:36 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

runningman

July 10, 2010, 03:55:36 PM
Looking for the plastic tube supports that snap to the outside of the column and the o-ring that goes between the brackets.  Anyone know if they are being reproduced??  Also looking for the wiring harness connector if anyone has an extra... Thanks

Matt

runningman

#2
July 11, 2010, 11:53:50 AM
Looking for the small white plastic clips, i guess they help support the tube inside of the column.  I'll get a pic of it today and post.

Matt

gtx6970

#3
July 13, 2010, 07:23:59 PM
Quote from: runningman on July 11, 2010, 11:53:50 AM
Looking for the small white plastic clips, i guess they help support the tube inside of the column.  I'll get a pic of it today and post.

Matt

these ?

runningman

#4
July 17, 2010, 04:23:31 PM
Quote from: gtx6970 on July 13, 2010, 07:23:59 PM
Quote from: runningman on July 11, 2010, 11:53:50 AM
Looking for the small white plastic clips, i guess they help support the tube inside of the column.  I'll get a pic of it today and post.

Matt

these ?



Those are the clips that go on the bracket I believe, not the ones I was looking for but could use those as well.  My internet was down this week, I'll post a pic of the other clips tomorrow.  Do you carry those ones in the pic?  Thanks

Matt

b5blue

#5
July 17, 2010, 06:13:08 PM
Matt do you mean the bushing/bearing on the bottom of the column tube in the motor bay?  :scratchchin:

gtx6970

#6
July 18, 2010, 12:00:53 PM
Matt,
I'm not familiar with any  other kind of clip in a 1968 column. There is a white lower bearing support on the bottom and the only other serviceable parts up top is the upper bearing thats about 1" od

Yes, I have the lower support/ bearing @ $85 and the 3 clips shown above @ $15 set

runningman

#8
July 20, 2010, 05:15:08 PM
Okay, here are the clips I was referring to.

runningman

#9
July 23, 2010, 04:44:41 PM
 :popcrn:

runningman

#10
July 23, 2010, 04:59:54 PM
Here is a pic of that rubber gasket/o-ring that I need as well.

b5blue

#11
July 23, 2010, 07:35:44 PM
I want one too!  :yesnod:

MTPOCKET

#12
August 03, 2010, 11:44:30 PM
That seal I believe it is the steering column firewall seal here is a link to a Ebay sale for a non ac firewall set.. Looks like you might have to buy the whole kit. No luck on the other item you need..

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120360563825&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=3b49083312a0a0e201f32b93fff68a98&rvr_id=119738403412&ua=WXF%3F&itemid=120360563825

RD

#13
August 05, 2010, 07:21:25 AM
the o-rings can be found on ebay.. saw them there before.  those plastic clips though, i have never seen.
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

runningman

#15
August 05, 2010, 04:04:23 PM
Quote from: RD on August 05, 2010, 07:21:25 AM
the o-rings can be found on ebay.. saw them there before.  those plastic clips though, i have never seen.

Strange, I see these on the drawings that have been posted on here before.  I will see if I can find the drawings and repost.
Quote from: gtx6970 on August 05, 2010, 08:55:15 AM
http://www.mcmaster.com/#o-rings/=89s9ze

Awesome, thanks...now...anyone have the dimensions for this o-ring?  Mine was rotted out, I don't think there is enough for an accurate description.  Thanks

Matt

Chargermoneypit

#16
September 23, 2010, 11:22:05 PM
I am also looking for the same clip that goes on the steering cloumn. Did anyone come up with where they can be puchased???
Print
Go Up Pages1
User actions