Rear Quarter window adjustment.

[kw mopar]

After reinstall my power window on one side will not go up all the way. How do I adjust to make it go up and forward a bit more. There was a post a time ago of a guy with the same problem. It touches the weather stripping tight at the back first so I think my motor is plenty powerfull. I have tried a few things but it looks like towards the top of its cycle the window needs to come forward when I compare it to a crank window on my 70. Thanks in advance.  Rob.

[Finn]

Have you tried adjusting the one circled in the picture below?
I'm having the same issue but Ive been able to semi-correct it by adjusting the position of that slider. Still not where it should be though.

[Finn]

Hi, sorry to bring back an old thread but does anyone know how to fix the problem in the original post? I had my windows aligned at some point last year but they have since slipped back out of alignment. I think I can bring the top of the glass back towards the outside of the car if can I adjust this part:




I should be able to put a wrench on it right? It's soaking in penetrating oil right now but I haven't gotten it to budge yet.

[Patronus]

The entire assembly slides froward and back via 4-5 7/16" bolts. Just need to loosen and slide. The larger nuts with the center bolts are to adjust glass in or out. Also check the glass stops to make sure your not fighting those...and the stop bolts are very long and can hang up the glass, cut 1/4" off em...

[poppa]

http://www.dodgecharger.com/forum/index.php/topic,84463.0.html

I'm still fighting this monster.....

Who's got the best fitting roof rail weather stripping?