News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

383 Cam choices

Started by scstoddard70, May 23, 2010, 06:21:48 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 All
User actions

BSB67

#25
June 02, 2010, 07:25:32 PM
"For what it's worth, you have only expressed opinion as well, you admitted that your dyno data did not include the Performer."

Correct, Performer compared to SD.  Performer compared to stock cast iron HP intake was worth a little less than 0.3 sec, and over 3 mph.  I would not expect this kind of change on a stockish 383, as I had a little more cam and CR but probably similar to what the OP is considering.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

Patronus

#26
June 03, 2010, 10:31:09 PM
who is SD?
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

TUFCAT

#27
June 04, 2010, 09:45:56 PM
I think its a street dominator.  :icon_smile_big:

For what its worth....I'm going with an old Edelbrock DP4B intake on my 383 build.  And I won't comment on the reasons why! :eek2:

Print
Go Up Pages 1 2 All
User actions