replacing ..alot..of sheet metal

[rattlehead_74]

Hello im helping a friend work on his 70 road runner ..the car is on the rotisserie and he has a huge pile of new amd sheetmetal sitting in the corner,,,were wondering where to start ..where to brace ..where to measure ect before we cut...and is it safe to cut with it on the rotisserie?,,with it shored up under neath?  thank you!

[rattlehead_74]

 

[elacruze]

My car was solid anyway, just dented up so we didn't have to do floors.
Body guy welded braces across the door jams and interior, then welded in the frame connectors before taking off any sheetmetal. Then did the trunk floor, rear panel, valence, and both quarters one at a time. The valence had to be off for the trunk floor to go in.

[69*F5*SE]

Elacruze, so you got a full AMD trunk pan in by just having the rear valance off?  That's what I gotta do but was'nt sure it would fit through the opening other than removing the trunk latch support.