progress it's running!

[oldcarnut]

I didn't see the tire size unless I didn't go back far enough or missed it.  What did you get?

[FJ5WING]

what changes were made to lower the car?

[RAC95054]

Looks more Kosher to me.

Lower is better, IMO.  But in dropping the rear, it looks like you should also drop the front by 1/2" - 1", too.

[randr]

4 days of wiring issues! found my yearone underdash harness was wired wrong from year one!!!!!! damn them!

[randr]

what changes were made to lower the car?

for now i used a lowering kit will get springs re arched to do it right!

[randr]

I didn't see the tire size unless I didn't go back far enough or missed it.  What did you get?

i will get size for ya. they seem to fill wheel wells good.

[randr]

Have searched but cannot find if daytonas had front fender splash shields installed? im thinking no? can anyone confirm?

[randr]

I didn't see the tire size unless I didn't go back far enough or missed it.  What did you get?

i will get size for ya. they seem to fill wheel wells good.

P275/60r15 on back
P225/70r15 on front

[Amazzen]

Daytona fender splash shields?

They were on mine when I got the car and looked to be untouched, so I'll say yes (maybe it was hit and miss, given the fender exchange going on at Creative?).

Paul

[randr]

I should be more clear, front splash shields. The splash shields that mount inside toward the front of fender kinda goes around bumper bracket.

[Charger-Bodie]

There is a rubber one that goes there,but nothing from a Charger.

[randr]

Thanks! That's what I thought but was looking at pile I got left and thinking maybe...

[SnoPro440]

Nice car and nice to meet you yesterday.  Thanks for the parts too.

[randr]

Thanks! your charger is sweet! nice to meet you!

[randr]

getting close! should have it running in a few days! still need exhaust thats shipping and hope to have in a week or so.

[panhead]

I'm loving it !!!!!! Looking forward to seeing more!!

[randr]

Speaking of seeing more..... Update pics of your nose!!!!!!!!!

[Amazzen]

Looks beautiful.... (I especially like the radiator, seems to work well with the pristine engine bay)

Is there enough hood clearance or are you doing something to the hood? I recall having to source an original intake to make mine stay within the compartment (but then I also kept my 440 K-frame under the new 426).

Continued success...

[Amazzen]

Wooops, just looked at your air cleaner base again... very nice design! Looks like it saves a couple of inches of height and should provide sufficient air.

Why didn't I think of that! 

[WINGIN IT]

getting close! should have it running in a few days! still need exhaust thats shipping and hope to have in a week or so.

Be sure to get some video , so we can virtually drool ....

[200MPH]

im in awe!  some how i missed this thread

GREAT WORK SIR

[randr]

getting close! should have it running in a few days! still need exhaust thats shipping and hope to have in a week or so.

Be sure to get some video , so we can virtually drool ....

Will do a video for sure

[472 R/T SE]

May I ask what bracket you're using for your power booster? 

I'm running the Stage V too & the top of the air cleaner looks like it's quite a ways higher than the fenders but if you're running the Schmacher mounts you should be fine.  Even though we have different air cleaner assemblies.

[randr]

May I ask what bracket you're using for your power booster? 

I'm running the Stage V too & the top of the air cleaner looks like it's quite a ways higher than the fenders but if you're running the Schmacher mounts you should be fine.  Even though we have different air cleaner assemblies.

I'm using a factory "hemi" bracket from the ram man. very smart mopar brake guy! here are a few pics.... also have pic of air cleaner hight. the aircleaner base i have is very nice! saves at least 1 1/2" - 2"

[randr]

Looks beautiful.... (I especially like the radiator, seems to work well with the pristine engine bay)

Is there enough hood clearance or are you doing something to the hood? I recall having to source an original intake to make mine stay within the compartment (but then I also kept my 440 K-frame under the new 426).

Continued success...

Thanks! Radiator is from smith radiator you can find him online he does great mopar radiators! I have a hemi kframe from mega parts and with the "custom" air cleaner it fits.