Check out this Cam!!

[THE STIG]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350345893343&viewitem=&sspagename=STRK%3AMEWAX%3AIT

So I'll throw this out to those of you who have more knowledge about this stuff than me, I got a 70 Charger 500 originally a 383 2bbl replaced with 75 440 (from a New Yorker or somthing unfun like that) with an Edelbrock 650 cfm on top. I've got a basic understanding of how a motor works but not this technical. Im looking to pull some decent power from my engine but I want to stay streetable, and for what it's worth I'm considering a six pack. No need to jump over Coke bottles or anything like that, so with all that said what are you thoughts on that cam?

And while Im at it what about this too?
http://indianapolis.craigslist.org/pts/1733166086.html
He ment to say Sure Grip I'm sure.

[tan top]

i would not buy a second hand cam!thats been run !   prolly ok , but you never know if the lifters have been mixed up , if your set on buying ! by a new set of lifters & brake the cam in as normal   

[Nacho-RT74]

only deal I can see is we don't know the specs on them unless measure. I don't think an used setup is a big deal specially for a street car. Myself I have used used cams even mixing lifters ( accidentally ) and RIGHT NOW I'm not aware about some problem on my car, beside just a recent tappet noise ( 30K miles later ) what it could be not more than simple a tired lifter spring inside since is an occasional noise.

maybe to a strip or race use AN USED SET IS REALLY CRITICAL

JUST AN OPINION, NOT AN ADVICE