Bendix 4 Spot calipers

[bigfastjohn]

Hi guys still working on our Daytona here downunder. Car came with new calipers but as they have been sitting so many years I pulled them down,anyone know where to get new seals to put in them?

[nascarxx29]

 Will see if I can look up part number for them seals.Here are some vendors for those type brakes from F6 daytona

www.durabrake.com          has rotors only, that have to be installed on original hubs.  Problem is they have to be machined slightly to clear calipers.

WWW.calipersonline.com     have pads, and re-sleeved calipers also. You can buy rebuilt calipers outright, or exchange your originals

http://www.billrolikenterprises.com/products.asp?cat=14      also has pads


www.apexautosports.com    has replacement wheel studs


Another source for  NOS brake parts  There was a guy I got nos shoes and master cylinder and wheel cylinders from I recall craig the brake guru from NY .This vendor does mopar nats and various meets and is known for his NOS brake parts . 516-485-1935

[johntpr]

http://cgi.ebay.com/ebaymotors/MOPAR-4-Piston-Bendix-Caliper-Repair-Kit-65-69-/360244683198?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item53e041a1be

[PocketThunder]

Another source for  NOS brake parts  There was a guy I got nos shoes and master cylinder and wheel cylinders from I recall craig the brake guru from NY .This vendor does mopar nats and various meets and is known for his NOS brake parts . 516-485-1935

Man was this guy a hoot to talk with!     I was on the phone with him for 20 minutes and he put me on the waiting list for rotors and pads. 

Paul

[PocketThunder]

Dropped my 69 Charger R/T 4 piston bendix calipers off at Brake and Equipment Warehouse, Minneapolis, MN at noon today and they are rebuilding my calipers for me with stainless steel sleeves and new rubber seals.  The cost is $250 each side.  They were able to locate new rubber seals out of Canada.  He was ordering 50~60 sets so if you need them you can try this place.

Paul

[GPULLER]

Dropped my 69 Charger R/T 4 piston bendix calipers off at Brake and Equipment Warehouse, Minneapolis, MN at noon today and they are rebuilding my calipers for me with stainless steel sleeves and new rubber seals.  The cost is $250 each side.  They were able to locate new rubber seals out of Canada.  He was ordering 50~60 sets so if you need them you can try this place.

Paul

Are they gonna find you rotors too or can you still turn yours?

[PocketThunder]

Dropped my 69 Charger R/T 4 piston bendix calipers off at Brake and Equipment Warehouse, Minneapolis, MN at noon today and they are rebuilding my calipers for me with stainless steel sleeves and new rubber seals.  The cost is $250 each side.  They were able to locate new rubber seals out of Canada.  He was ordering 50~60 sets so if you need them you can try this place.

Paul

Are they gonna find you rotors too or can you still turn yours?

Gonna use mine.